Regedit.exe & Regedt32.exe Know the difference

Have you ever noticed that there are two versions of the Registry Editor on your computer? Ever wondered why? Well let me just give you a little insight!

It all depends on your Operating System. If you have Windows 2000 :

Regedit.exe

Regedit.exe is included with Windows NT 4.0 and Windows 2000 primarily for its search capability. You can use Regedit.exe to make changes in the Windows NT 4.0 and Windows 2000 registry, but you cannot use it to view or edit all functions or data types on Windows NT 4.0 and Windows 2000.

The following limitations exist in the Regedit.exe version that is included with Windows NT 4.0 and Windows 2000:

You cannot set the security for registry keys.
You cannot view, edit, or search the value data types <>REG_EXPAND_SZ and <>REG_MULTI_SZ. If you try to view a <>REG_EXPAND_SZ value, Regedit.exe displays it as a binary data type. If you try to edit either of these data types, Regedit.exe saves it as <>REG_SZ, and the data type no longer performs its intended function.
You cannot save or restore keys as hive files.
Microsoft recommends that you use Regedit.exe only for its search capabilities on a Windows NT 4.0-based or Windows 2000-based computer.

Regedt32.exe

Regedt32.exe is the configuration editor for Windows NT 4.0 and Windows 2000. Regedt32.exe is used tomodify the Windows NT configuration database, or the Windows NTregistry. This editor allows you to view or modify the Windows NT registry.The editor provides views of windows that represent sections of theregistry, named hives. Each window displays two sections. On the leftside, there are folders that represent registry keys. On the right side,there are the values associated with the selected registry key. Regedt32 isa powerful tool, and you must use it with extreme caution when you changeregistry values. Missing or incorrect values in the registry can make theWindows installation unusable.

Note: Unlike Regedit.exe, Regedt32.exe does not support importing and exporting registration entries (.reg) files.

Or..Windows XP and Windows Server 2003

Regedit.exe

Regedit.exe is the configuration editor for Windows XP and Windows Server 2003. Regedit.exe is used tomodify the Windows NT configuration database, or the Windows NTregistry. This editor allows you to view or modify the Windows NT registry. It supports setting security on registry keys, viewing and editing <>REG_EXPAND_SZ and <>REG_MULTI_SZ, and saving and restoring hive files.On the leftside, there are folders that represent registry keys. On the right side,there are the values associated with the selected registry key. Regedit isa powerful tool. You must use extreme caution when you use it to changeregistry values. Missing or incorrect values in the registry can make theWindows installation unusable.

Regedt32.exe

In Windows XP and Windows Server 2003, Regedt32.exe is a small program that just runs Regedit.exe.

Mobile secrect codes

Siemens Mobile Secret Codes:


C25:

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button

Pin Out (electrical connections)

1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO


Languages:

*#0000#+green phone - choose automaticaly
*#0001#+green phone - English
*#0030#+green phone - Greek
*#0031#+green phone - Netherlands
*#0032#+green phone - French
*#0034#+green phone - Spanish
*#0039#+green phone - Italian
*#0049#+green phone - German
*#0090#+green phone - Turkish

How to change PIN:

**04*old PIN*new PIN*new PIN#

How to check simlock status

*#0606# and then press left soft-key, you will see strange characters, then text ("brak blokad"). If you see for example 260-02, it means the phone is locked to Era GSM. In older models you can use *#06# and see the same information after clicking on left key (you will see IMEI and software version).


S4:

Monitor Mode - how to activate:

Press left soft-key, then 9 (SET UP) 8 (Phone Status). You will see IMEI number, then press left soft-key and in order 7684666 and red phone at the end (monitor mode has been activated). To read information from Monitor Mode - press left soft-key, then 5 (GSM SERVICE) and 6 (Monitor). Monitor mode turns off when you switch off the phone. You must activate it again if you want.

How to see date of software:

Press left soft-key, then 9 (SET UP) 8 (Phone status). You will see IMEI number, then press twice left soft-key, 98, left soft-key, 7684666, red phone (activates Monitor Mode), left soft-key, 56 (turns on Monitor Mode), left soft-key, 98, left soft-key, 7684666, hang up (red phone) >abck to "normal" and then left soft-key, 56.

S6, S8:

If you add to phonebook under 'own phone number' +12022243121 with namez (for example MMI), then you will see something smile.gif

S10, E10:

In phonebook enter +12022243121 as your own phone no. You will see a picture with sun, two palms and greetings.

S15e:

Monitor Mode:

Code: *#7436267*8378# (*#SIEMENS*TEST#)
Hold red phone button until it code disapears.
Menu 3.3.4 Choose frequency.
Menu 3.3.4.1 Automaticaly.
Menu 3.3.4.2 Choose GSM-900
Menu 3.3.4.3 Choose GSM-1800

Menu 10.1 MS info
Menu 10.2 Soft date
Menu 10.2.1 Software version.
Menu 10.2.2 EEProm version.
Menu 10.3 Tst and product info.
Menu 10.3.1 Handware data.
Menu 10.3.2 Date of manufacture
Menu 10.3.3 Service date
Menu 10.3.4 Date of repair.


S25:

Enhanced Full Rate
*#3370# turns on
#3370# turns off

Haft Rate Mode
*#4720# turns on
#4720# turns off.

Languages:

*#0000#+green phone - choose automaticaly
*#0001#+green phone - English
*#0030#+green phone - Greek
*#0031#+green phone - Netherlands
*#0032#+green phone - French
*#0034#+green phone - Spanish
*#0039#+green phone - Italian
*#0049#+green phone - German
*#0090#+green phone - Turkish

How to change PIN2?

**04*old PIN2*new PIN2*new PIN2#

What is my software version?

Menu 8-8-2 press left-softkey when you see IMEI number, or *#06# and then green phone button and then press left soft-key.

How to extend battery life:

IrDA - turn on only when you need.
Turn off automatic network search (6-3)Turn off Vibration alarm.

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button



S25, M35, S35, C35

SP unlock *#0003*(secret code 8 digits)#

*#0606# shows you Secret Code, but only without SIM Card.

*#06# for checking the IMEI (International Mobile Equipment Identity)

Resets language to automatic selection : * # 0000 # then Green button






Secret Codes Of Nokia Mobiles:


Below we present secret codes of nokia mobile phones which are very useful for people who unlock phones and for amateurs of this topic. These special key sequences entered fromkeyboard of phone allow you to get some important information like IMEI number, release date, software version and much more. You can also choose default language, activatenetmonitor ect.


1610/1630

*#170602112302# (software version)

1610/1611

IMEI number: -*# 0 6 #
Software version: -* # 1 7 0 6 0 2 1 1 2 3 9 2 #
Simlock status: - # 9 2 7 0 2 6 8 9 #


2110

*#9999# (software version)

2110i/2110e

*#170602112302# or (depends on model)*#682371158412125# (software version)


NOKIA3110

*#06# -IMEI

*#3110# -Software version

##002# - allows to turn off voice mail.

*#7780# - restore factory settings

*#746025625#(or *#sim0clock#) - to check if clock of sim (SIM-Clock) can be stopped (SIM-Clock-stop is akind of standby mode which saces battery)

*#92702689# (or *#war0anty#) -"warranty code:"- you have to enter one of the following codes:

6232 (OK)displays month and year of production date (ie "0198")

7332 (OK) - displays date of last repair - if there is (ie. "DATE NOT SAVED")

7832 (OK) - displays date of purchase - if there is (ie. "DATE NOT SAVED")

9268 (OK) -displays serial number

37832 (OK) -sets purchase date in format MMYY (MM - month, YY - year)- attention: you can set it only once, so beware !

87267 (OK)-displays message "Confirm Transfer?" - meaning is unknown (?)

* # 9 2 7 0 2 6 8 9 # -Simlock info

*#31# (call) -sets if your phone no. will be hidden or not (works only in some networks)

*#76# (call) -sets if target phone number when you call should be displayed (works only in some networks)

*#77# (call) -(work s only in some networks)

*#33/35# (call -displays message "Service not active".

**31# (call) -your no. will not be showed to others when you make a call



3210


*#06# -IMEI

*#0000# -software version

*#92702689# (or *#war0anty#)- enters service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.


#3370# -Turns off sound encoding system Enhanced Full Rate .

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.

xx# -Replace xx with desired phonebook entry - press # and you will see it on display.


51XX


*#06# -IMEI

*#0000# - Software version

*#92702689#( or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.

#pw+1234567890+1 -provider lock status

#pw+1234567890+2 -Network lock status

#pw+1234567890+3 -Provider lock status

#pw+1234567890+4 - SimCard lock status


NOKIA 61XX


*#06# -IMEI

*#0000# ;-*#99 99# (Nokia 6130)


*#92702689# (or *#war0anty#) Software versionEnter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy.

#4720# -Turns off battery save mode.


NOKIA8810


*#06# - IMEI

*#0000# -Software version

*#92702689# (or *#war0anty#) Enter service mode.

*3370# -Turns on sound encoding system - Enhanced Full Rate.

#3370# -Turns off sound encoding system - Enhanced Full Rate.

*4720# -Turns on battery save mode - saves about 30 % of energy

#4720# -Turns off battery save mode - saves about 30 % of energy



NOKIA99OO


*#06# -IMEI

*#682371158412125# -Software version

*#3283# -Displays week and year of manufacture, ie. 1497 means 14th week of 1997.



NOKIA 911O


*#06# IMEI


*#0000# SOFTWARE VERSION

*3370# Turns on sound encoding system - Enhanced Full Rate.

#3370# Turns off sound encoding system - Enhanced Full Rate.

*4720# Turns on battery save mode - saves about 30 % of energy.

#4720# Turns off battery save mode.



NOKIA 81XX


*#06# IMEI
*#8110# Software version
xx# Replace xx with desired phonebook entry - press # and you will see it on display

*#92702689# (or *#warOanty#)

"Warranty code:" - you have to enter one of the following codes:

9268 (OK) displays IMEI (International Mobile Equipment Identification)

6232 (OK) displays date of manufacture in format MMYY (MM - month, RR - year)


7832 (OK) displays date of purchase

7332 (OK) displays date of repair or upgrade

37832 (OK) sets date of purchase in format MMYY (MM - month, RR - year) - attention: you can set it only once, so beware !!!

87267 (OK) transmits user data/move data do service PC




Motorola Codes:



Motorola 920
---------------


Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.


The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.





Motorola 930
--------------


Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.


Motorola 930

The 54# Tip:

Type 1#, 2#........54# on the keypad (when you're not in the menu) to get the phone number used for with this key when speed dialing.





Motorola 6200
--------------



(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

UK (Orange)
AU

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered left to right, keypad up, battery down

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector






Motorola 7500
-------------



(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

IT (model: F16 HW: 5.2 SW: 2.1)


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs
Numbered right to left, keypad up, battery down looking

1. Gnd
2. Pos
3. True data (TD) (input)
4. Complimentary data (CD) (input)
5. Return data (RD) (output)
6. Audio gnd
7. Audio out
8. Audioin




Motorola 8200
--------------



(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector





Motorola 8400
-------------



(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

ES, AU, NL, BE


What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.

Pin Outs

Numbered right to left, keypad up, battery down looking

1. Audio Ground
2. V+
3. True data (TD) (input)
4. Downlink - Complimentary data (CD) (input)
5. Uplink - Return data (RD) (output)
6. GND
7. Audio Out - on/off
8. Audio In
9. Manual Test - ???
10. Battery Feedback
11. Antenna connector





Motorola 8700
--------------



*#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

These countries has been reported working:

AU, IT, SG, DE, ES, ZA

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.





Motorola CD 160
---------------



Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.





Motorola CD 520
----------------



Press menu and type one of these numbers and press OK:

11 = Status Review
13 = Available Networks
14 = Preferred Networks
22 = Select Keypad Tones
25 = Require SIM Card PIN
26 = Language Selection
32 = Repetitive Timer
33 = Single Alert Timer
34 = Set IN-Call Display
35 = Show Call Timers
36 = Show Call Charges
37 = Call Charge Settings
38 = Reset All Timers
43 = Reset All Timers
45 = Show Last Call
46 = Total For All Calls
47 = Lifetime Timer
51 = Change Unlock Code
52 = Master Reset
53 = Master Clear (Warning!! May result in deleting the Message Editor!!!)
54 = New Security Code
55 = Automatic Lock
63 = Battery Saving Mode

Free call tip

1 Enter the phone number
2 Enter OK
3 Type *#06#
4 Press Button C
5 And finally press the button for power off.

You should now be able to talk without being billed.





Motorola d460
--------------



#06# for checking the IMEI (International Mobile Equipment Identity)

Activate RBS

(Note: pause means the * key held in until box appears)
To activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 1 [pause] [ok]
You now have to press the [MENU] and scroll to the 'Eng
Field Options' function with the keys, and enable it.

De-activate RBS

To de-activate RBS type: [pause] [pause] [pause] 1 1 3
[pause] 0 [pause] [ok]
This only works with some versions of software.

What's the use of RBS:

Get Distance From Base Station - Place a call, when it
is answered, press [MENU] until 'Eng Field Option' is
displayed, press [OK], select 'Active Cell', press [OK],
press [MENU] until 'Time Adv xxx' appears, where xxx is
a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in
meters.

Get Signal Quality - press [MENU] until 'Eng Field
Option' is displayed, press [OK], select 'Active Cell',
press [OK], press [MENU] until 'C1' appears. This is the
signal quality. If it becomes negative for longer than 5
seconds, a new cell is selected.





Motorola V3688
---------------



#06# for checking the IMEI (International Mobile Equipment Identity)

Enhanced Full Rate Codec (EFR):

To Enable EFR press [][][] 119 [] 1 [] OK.
To Disable EFR press [][][] 119 [] 0 [] OK

NOTE: Nothing appears on Screen.





Ericsson Mobile Secret Codes:


T10

*#06# for checking the IMEI (International Mobile Equipment Identity)

>*<<*<* for checking the firmware revision information (software release) >*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

Shortcut for Last Dialed call menu

If you for some reason don't want to enter the 'Last Dialed calls menu' by using the 'YES' key you can use the following key
stroke instead: First '0' then '#'.

Access menu without Sim card

To access to the menu in your phone without having a card inside do the following: type **04*0000*0000*0000# When display say "Wrong Pin" press NO and you have access to the all menus: Info, Access, Settings, Calculator, Clock, Keylock On?, Mail, Phone book. NOTE if you try this on your phone may stop at Keylock On? menu and you´ll have to take your battery out to turn the phone on again. And this will not care about Phone lock!

A way to (un)lock your cell phone on to the network(subset):
1. Press <**< tac =" Type" fac =" Final" snr =" Serial" sp =" Spare">*<<*<* for checking the firmware revision information (software release) >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**<>*<<*<* for checking the firmware revision information (software release) >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user. (not even to you... or is it ? in case please let me know!)

<**<>*<<*<* for checking the firmware revision information (software release) >*<<*<*> 1-row text strings. if pressing yes you can check the phones text programming in currently selected language.(298 entries)

>*<<*<*>> n-row text strings. if pressing yes you can check the phones text programming in currently selected language.(160 entries?)

The Service Provider (SP) Lock

The Service Provider (SP) Lock menu is used to lock the cell phone to the SP's SIM card. Once the cell phone is locked to a specific operator, if one inserts a SIM card from a different operator the phone will refuse to accept it! The cell phone will however accept another SIM card from the same operator.

To activate/deactivate this lock one needs a special secret code that is not available to the end user.

Here is how to activate the menu:

<**<> key for a second or two The option Menu size turns up Choose 'yes' and go from there.

An alarm clock turned up too but it never rang. I think this was because there is no clock in the phone.

Free phone calls using the GA628

This trick has only been reported working on PREPAID GSM CARDS and in some countries and with some sw versions.
The prepaid GSM SIM CARD is a kind of "SIM card" which only has a sertant amount of credit on it (like a normal phonebox telecard)... if it can be traced? - we don't know...

Well..here's the trick you dial the no. normally and press YES. While "connecting" is shown on the screen, the following procedure should be carried out: Press CLR then 0 then # and then NO (twice) so as to switch OFF the phone. You can then still speak on the phone while it is switched off but the SIM card does not record your calls which will lead to FREE phone calls in some countries.. we hope!!

Another variant of the code

Make a Call, while the phone says Connecting type 083# (the position 83 must be empty! ), when phone says Pos Emtpy, press the NO key and turn off the phone.

If you can make the call with the phone turned off you will face a problem when you need to hang up the phone...the only way for you to do that is remove the battery...???

Simple ways speed Up Internet Explorer

To comply with current Internet standards, Internet Explorer limits the number of simultaneous downloads to two downloads, plus one queued download. This configuration is a function of the browser. However, as connection speeds increase, and the number of total connections that are allowed to Internet servers increase, the two-connection limit may be restrictive.

Please Note: Changing the maximum number of connections beyond two is a violation of Internet standards; use at your own risk!

To increase the number of simultaneous connections that are allowed, follow these steps:

1. Start the Registry Editor
2. Go to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Internet Settings
3. Select New > DWORD Value from the Edit menu
4. Name the new value MaxConnectionsPer1_0Server
5. Right-click the MaxConnectionsPer1_0Server value and choose Modify
6. Under Base, click the radio button next to Decimal
7. In the Value Data: box enter the number of simultaneous connections you want to set (for example 10 is a good value), and 8. click OK
9. Repeat steps 3 - 7 using the new value MaxConnectionsPerServer
10. Exit the registry editor

Test your Anti Virus software

How do I Test My VirusScan Installation? (Eicar)

Description

After installing VirusScan, you may logically wonder, how do I know if it's working? The answer is a test virus. The EICAR Standard AntiVirus Test File is a combined effort by anti-virus vendors throughout the world to implement one standard by which customers can verify their anti-virus installations.

Solution

To test your installation, copy the following line into its own file, then save the file with the name EICAR.COM. More detailed instructions are found below.

X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

The file size will be 68 or 70 bytes.

If VirusScan is running and configured correctly, when you try to save the file, VirusScan will detect the virus. If VirusScan is not running, start it and scan the directory that contains EICAR.COM. When your software scans this file, it will report finding the EICAR test file.

Note that this file is NOT A VIRUS. Delete the file when you have finished testing your installation to avoid alarming unsuspecting
users.

The eicar test virus is available for download from the following website:
http://www.eicar.org/download/eicar.com

Creating Eicar.com

1. Click on Start.
2. Select Run.
3. In the Open box type: notepad
4. Maximize the window.
5. Highlight the following on the following line of text:
X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*
6. Right click on the highlighted text and choose 'copy'.
7. Switch back to Notepad.
8. Right click anywhere inside of Notepad and select 'paste'.
9. Click the File menu and select 'save as'.
10. Change the 'Save as Type' to 'all files'.
11. Name the file eicar.com.

DVD Regions Information

DVD Regions Information

The DVD region code identifies a DVD's compatibility with the players typically sold in a particular region.

The following graphic shows the approximate location of each region.

Image

Region 0 (or "region free") is compatible with DVD players from any region.

The majority of all current titles play only in one specific region unless otherwise noted. DVDs sold by Amazon.co.uk are encoded for Region 2 or Region 0. Region 2 DVDs may not work on DVD players in other countries.

Region 1 DVDs sold by Marketplace sellers

Region 1 discs are intended for use with standard DVD players in North America (Canada and the USA). In most instances they can also be played on compatible "multi-region" DVD players (also known as "chipped" or "region-free" players).

They also require an NTSC-compatible television. NTSC is the standard picture format in North America, and differs from the PAL format adopted in Britain and Europe. Region 1 DVDs are usually presented in NTSC format, so you should ensure that your TV is capable of reading the NTSC signal before purchasing Region 1 DVDs.

Regional Coding Enhancement (RCE)

Regional Coding Enhancement (RCE) has been added by some film studios (specifically Warner and Columbia) to selected Region 1 DVDs, with the intention of preventing these discs from playing on some multi-region DVD players. We are therefore unable to guarantee that all Region 1 discs will be compatible with all multi-region players.

Global DVD region countries

This is not a definitive list and is intended only as a guide.

Region 1 - US, US Territories and Canada

American Samoa, Canada, Guam, Palau, Mariana Islands, Marshall Islands, Puerto Rico, Micronesia, United States, U.S. Virgin Islands


Region 2 - UK, Europe, Japan, South Africa and Middle East

Albania, Andorra, Austria, Bahrain, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Egypt, Finland, France, Germany, Gibraltar, Greece, Greenland, Hungary, Iceland, Iran, Iraq, Ireland, Israel, Italy, Japan, Jordan, Kuwait, Lebanon, Liechtenstein, Luxembourg, Macedonia, Malta, Moldova, Monaco, Netherlands, Norway, Oman, Poland, Portugal, Qatar, Romania, San Marino, Saudi Arabia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Syria, United Arab Emirates, United Kingdom, Vatican City, Yemen, Yugoslavia


Region 3 - Southeast and East Asia

Cambodia, Hong Kong, Indonesia, Laos, Malaysia, Myanmar, Phillipines, South Korea, Taiwan, Thailand, Vietnam


Region 4 - Australia, New Zealand, Central and South America

Antigua, Argentina, Aruba, Australia, Bahamas, Barbados, Barbuda, Belize, Bolivia, Brazil, Chile, Colombia, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, Falkland Islands, French Guiana, Grenada, Guatemala, Guyana, Haiti, Honduras, Jamaica, Mexico, New Guinea, New Zealand, Nicaragua, Panama, Paraguay, Peru, Suriname, Trinidad, Tobago, Uruguay


Region 5 - Former Soviet Union, Indian sub-continent, Africa, North Korea and Mongolia

Afghanistan, Algeria, Angola, Bangladesh, Belarus, Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo, Djibouti, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Gabon, Gambia, Georgia, Ghana, Guinea, Guinea-Bissau, India, Ivory Coast, Kazakhstan, Kenya, Latvia, Lesotho, Liberia, Libya, Lithuania, Madagascar, Malawi, Mali, Mauritania, Mauritius, Mongolia, Morocco, Mozambique, Namibia, Niger, Nigeria, North Korea, Pakistan, Russia, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, Sri Lanka, St. Helena, Sudan, Tanzania, Togo, Tunisia, Turkmenistan, Uganda, Ukraine, Uzbekistan, Zambia, Zimbabwe


Region 6 - China

China


Region 7 - Reserved for future use

Region 8 - International Territories (ships, planes, etc)

Check in Dos to see if you are infected.

When you first turn on you computer (BEFORE DIALING INTO YOUR ISP),
open a MS-DOS Prompt window (start/programs MS-DOS Prompt).
Then type netstat -arn and press the Enter key.
Your screen should display the following (without the dotted lines
which I added for clarification).

-----------------------------------------------------------------------------
Active Routes:

Network Address Netmask Gateway Address Interface Metric
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
255.255.255.255 255.255.255.255 255.255.255.255 0.0.0.0 1

Route Table

Active Connections

Proto Local Address Foreign Address State

--------------------------------------------------------------------------------

If you see anything else, there might be a problem (more on that later).
Now dial into your ISP, once you are connected;
go back to the MS-DOS Prompt and run the same command as before
netstat -arn, this time it will look similar to the following (without
dotted lines).

-------------------------------------------------------------------------------------

Active Routes:

Network Address Netmask Gateway Address Interface Metric
0.0.0.0 0.0.0.0 216.1.104.70 216.1.104.70 1
127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1
216.1.104.0 255.255.255.0 216.1.104.70 216.1.104.70 1
216.1.104.70 255.255.255.255 127.0.0.1 127.0.0.1 1
216.1.104.255 255.255.255.255 216.1.104.70 216.1.104.70 1
224.0.0.0 224.0.0.0 216.1.104.70 216.1.104.70 1
255.255.255.255 255.255.255.255 216.1.104.70 216.1.104.70 1

Route Table

Active Connections

Proto Local Address Foreign Address State
TCP 0.0.0.0:0 0.0.0.0:0 LISTENING
TCP 216.1.104.70:137 0.0.0.0:0 LISTENING
TCP 216.1.104.70:138 0.0.0.0:0 LISTENING
TCP 216.1.104.70:139 0.0.0.0:0 LISTENING
UDP 216.1.104.70:137 *:*

--------------------------------------------------------------------------------

What you are seeing in the first section (Active Routes) under the heading of
Network Address are some additional lines. The only ones that should be there
are ones belonging to your ISP (more on that later). In the second section
(Route Table) under Local Address you are seeing the IP address that your ISP
assigned you (in this example 216.1.104.70).

The numbers are divided into four dot notations, the first three should be
the same for both sets, while in this case the .70 is the unique number
assigned for THIS session. Next time you dial in that number will more than
likely be different.

To make sure that the first three notation are as they should be, we will run
one more command from the MS-DOS window.
From the MS-DOS Prompt type tracert /www.yourispwebsite.com or .net
or whatever it ends in. Following is an example of the output you should see.

---------------------------------------------------------------------------------------

Tracing route to /www.motion.net [207.239.117.112]over a maximum of 30 hops:
1 128 ms 2084 ms 102 ms chat-port.motion.net [216.1.104.4]
2 115 ms 188 ms 117 ms chat-core.motion.net [216.1.104.1]
3 108 ms 116 ms 119 ms www.motion.net [207.239.117.112]
Trace complete.

------------------------------------------------------------------------------------------

You will see that on lines with the 1 and 2 the first three notations of the
address match with what we saw above, which is a good thing. If it does not,
then some further investigation is needed.

If everything matches like above, you can almost breath easier. Another thing
which should you should check is programs launched during startup. To find
these, Click start/programs/startup, look at what shows up. You should be
able to recognize everything there, if not, once again more investigation is
needed.

-------------------------------------------------------------------------------------------

Now just because everything reported out like we expected (and demonstrated
above) we still are not out of the woods. How is this so, you ask? Do you use
Netmeeting? Do you get on IRC (Internet Relay Chat)? Or any other program
that makes use of the Internet. Have you every recieved an email with an
attachment that ended in .exe? The list goes on and on, basically anything
that you run could have become infected with a trojan. What this means, is
the program appears to do what you expect, but also does just a little more.
This little more could be blasting ebay.com or one of the other sites that
CNNlive was talking about.

What can you do? Well some anti-virus software will detect some trojans.
Another (tedious) thing is to start each of these "extra" Internet programs
one at a time and go through the last two steps above, looking at the routes
and connection the program uses. However, the tricky part will be figuring
out where to tracert to in order to find out if the addresses you see in
step 2 are "safe" or not. I should forewarn you, that running tracert after
tracert, after tracert might be considered "improper" by your ISP. The steps
outlined above may not work exactly as I have stated depending upon your ISP,
but with a true ISP it should work. Finally, this advise comes with NO
warranty and by following my "hints' you implicitly release me from ANY and
ALL liability which you may incur.


Other options

Display protocol statistics and current TCP/IP network connections.
Netstat [-a] [-e] [-n] [-s] [-p proto] [-r] [intervals]

-a.. Display all connections and listening ports.
-e.. Display Ethernet statistics. This may be combined with the -s option.
-n.. Diplays address and port numbers in the numerical form.
-p proto..Shows connections for the protocol specified by proto; proto may be
TCP or UDP. If used with the -s option to display per-protocol statistics,
proto may be TCP, UDP, of IP.
-r.. Display the routing table.
-s.. Display per-protocol statistics. By default, statistics are shown for TCP
UDP and IP; the -p option may be used to specify a subset of the default
interval..Redisplay selected statistics, pausing intervals seconds between each
display. If omitted. netstat will print the current configuration information
once

Prototype (2009) FullRip PC Game for Windows

The game is set in New York City as a virus infects people and government military try to defend against it. The protagonist of the story is named Alex Mercer, who has enemy-absorbing and shapeshifting powers. He can take memories, experiences, biomass and physical forms of the enemies through absorption. Alex can also shapeshift into more specialized forms for attack, defense or sensory enhancement. All of these together are intended to give players multiple ways to complete their objectives. Parallel to the game storyline is the ability to play the game as a sandbox-style video game giving the player free roam of New York City.

You are the PROTOTYPE, Alex Mercer, hiding in human form. You step out onto the streets of New York with no memory, but limitless power. As a terrifying viral epidemic sweeps across Manhattan, top-secret Black Watch Special Forces move in, transforming it into a war zone. Delve into the mysteries of your origin, the true nature of your power and your part in a conspiracy 40 years in the making.

Image

Game features:

* Deadly shape shifting action
* Unprecedented locomotion and agility
* Deceive & destroy gameplay
* New , original experience for games
* New York city is your playground

CODE

http://rapidshare.com/files/268839651/Prototype_Repack.part01.rar
http://rapidshare.com/files/268835520/Prototype_Repack.part02.rar
http://rapidshare.com/files/268840713/Prototype_Repack.part03.rar
http://rapidshare.com/files/268836809/Prototype_Repack.part04.rar
http://rapidshare.com/files/268836823/Prototype_Repack.part05.rar
http://rapidshare.com/files/268838510/Prototype_Repack.part06.rar
http://rapidshare.com/files/268839896/Prototype_Repack.part07.rar
http://rapidshare.com/files/268840804/Prototype_Repack.part08.rar
http://rapidshare.com/files/268839869/Prototype_Repack.part09.rar
http://rapidshare.com/files/268844072/Prototype_Repack.part10.rar
http://rapidshare.com/files/268842707/Prototype_Repack.part11.rar
http://rapidshare.com/files/268839524/Prototype_Repack.part12.rar
http://rapidshare.com/files/268839847/Prototype_Repack.part13.rar
http://rapidshare.com/files/268838565/Prototype_Repack.part14.rar
http://rapidshare.com/files/268840826/Prototype_Repack.part15.rar
http://rapidshare.com/files/268839453/Prototype_Repack.part16.rar
http://rapidshare.com/files/268835830/Prototype_Repack.part17.rar
http://rapidshare.com/files/268842411/Prototype_Repack.part18.rar
http://rapidshare.com/files/268838205/Prototype_Repack.part19.rar

Free Income @ your Door Step

How much we will pay you ?

- $5 for free sign up

- $5 monthly

- $1 monthly for each member you refer

egold click™ is your new chance for getting paid for what you are already doing

• It is easy to sign-up and takes less than 2 minutes.
• Membership is completely free. You will never be charged as a member of egold click™.
• All of your information will be completely private. We bsanadmaxelieve we have the best privacy policy on the Internet. None of your personal information will be sold, rented or shared without your permission.
• Become a part of the next generation of the Internet. As an economic network, egold click™ is helping shape the future role of consumers on the web. Join now and get involved in the future of the Internet.
• Don't miss out. There is zero cost to becoming a member, so get in early and tell your friends before they are already members. Like most companies, those who are early and active stand to benefit the most.
• It's your Internet – own a piece of it

Count your Money Now Just by Joining & Referals : http://egoldclick.com/?651050

Download Microsoft Office 2008 Professional (Mac OS X)

Code:

Microsoft Office 2008 for Mac is the most rank fecundity resolution for users on the Macintosh platform. Office 2008 for Mac features a redesigned individual interface, a coercive newborn graphics and charting engine for creating high-impact and compelling documents, spreadsheets, and presentations, nonnegative a newborn themes aptitude that simplifies the effect of applying a conformable countenance and see crossways documents.

FEATURES

Manufacturer Microsoft Corporation
License Type Complete Product
License Pricing Standard
Software Sub Type Office Suite
Manufacturer Part Number FWA-00013
Manufacturer Website Address www.microsoft.com
Software Name Office 2008 for Mac Special Media Edition - Complete Product
License Quantity 1 PC
# Features Office 2008 is a Universal Binary, was shapely by Mac users for Mac users, and includes some features which verify plus of inexplicit technologies of the Macintosh platform.
# Elements Gallery is the groundwork of the newborn individual interface, and gives cushy admittance to the most commonly utilised tools and templates. With the newborn UI, you”ll command the capabilities of Office for Mac more easily than ever before.
# Office 2008 includes OfficeArt, the coercive graphics engine also utilised in the Windows-based Office 2007 products. You intend enthusiastic cross-platform enter faithfulness and cushy admittance to stunning seeable and realistic effects.
# Your book module attain an effect with the recent styling of SmartArt graphics, which makes transforming book and bulleted lists into professed diagrams and graphics one-click easy.
# A newborn Themes aptitude simplifies the effect of applying a conformable countenance and see crossways documents. Easily administer a rank ordered of colors, fonts, and personalty to your Office 2008 documents, and modify them as easily as dynamical your mind.
# Automator Actions for Workflows in Microsoft Office enables you to automate Office 2008 with more than 70 pre-defined actions shapely to simplify your impact and modify your productivity. (Available in Office 2008 for Mac and Office 2008 for Mac Special Media Edition.)
# Compatibility Universal for Binary Support Intel- and PowerPC-based Macs
# Microsoft Exchange Server Support
# Automator Actions for Workflows in Microsoft Office
# Microsoft Expression Media

File Formats:
# HFS+ hornlike round info (also famous as Mac OS Extended or HFS Plus).
# Open XML

Supported Protocols:
# HTTP, DAV, and LDAP.

Language Support English
Product Type Software Suite
# Suite Contents Microsoft Word 2008
# Microsoft Excel 2008
# Microsoft Powerpoint 2008
# Microsoft Entourage 2008
# Messenger for Mac

Code:

http://rapidshare.com/files/203266264/OFFICE_MAc-www.warezraid.com.part1.rar
http://rapidshare.com/files/203267095/OFFICE_MAc-www.warezraid.com.part2.rar
http://rapidshare.com/files/203267820/OFFICE_MAc-www.warezraid.com.part3.rar
http://rapidshare.com/files/203268927/OFFICE_MAc-www.warezraid.com.part4.rar
http://rapidshare.com/files/203269648/OFFICE_MAc-www.warezraid.com.part5.rar
http://rapidshare.com/files/203270049/OFFICE_MAc-www.warezraid.com.part6.rar

Download RealVNC Enterprise 4.5.1 (Win & Mac)

VNC is remote control software which allows you to view and fully interact with one computer desktop (the “VNC server”) using a simple program (the “VNC viewer”) on another computer desktop anywhere on the Internet. The two computers don’t even have to be the same type, so for example you can use VNC to view a Windows Vista desktop at the office on a Linux or Mac computer at home. For ultimate simplicity, there is even a Java viewer, so that any desktop can be controlled remotely from within a browser without having to install software.

VNC is in widespread active use by many millions throughout industry, academia and privately. There are several versions to choose from, including a free version and some substantially enhanced commercial versions.

Release name: RealVNC.Enterprise.v4.5.1.Incl.Keymaker-CORE
Size: 6.26 MB

Release name: RealVNC.Enterprise.v4.5.1.MacOSX.Incl.Keymaker-CORE
Size: 5.55MB

Install/Register notes:
Use our keymaker to register the application.

Important note:
Run CORE10k.EXE to verify this release, if CRC-check fails or even CORE10k.EXE is missing - you are probably using webshit!

RealVNC Enterprise 4.5.1 for WIN:

http://hotfile.com/dl/9476288/cf98771/RVNCWIN-CORE.rar.html
OR
http://rapidshare.com/files/262280910/RVNCWIN-CORE.rar

Download Clutch (PC)(2009)

Clutch is a fast-paced arcade racing game which will challenge the resilience of anyone’s nerves. You play as a person who has survived a catastrophe of the Large Hadron Collider (LHC) while everyone else in the city has been transformed into a bloodthirsty zombie. You return to the abandoned city, looking for a way to change the zombies back into humans. The only way to survive is to move on fast armored vehicles.
The player will complete different missions: racing, rescue and more to finally learn the truth.

Quote: System Requirements:
OS: Microsoft Windows XP/Vista
Processor: Pentium IV 2.5 / AMD Athlon 2800+
Memory: 512 ÐœB RAM
Graphics: 9.0s DirectX-compatible video card with 128 MB of memory, supports shader model 2
DirectX®: DirectX 9.0c
Hard Drive: 1 GB
Sound: DirectX-compatible
Code:

Code:

http://hotfile.com/dl/10063520/28f3ef4/Clutch-SKIDROW.part1.rar.html 
http://hotfile.com/dl/10063536/2105608/Clutch-SKIDROW.part2.rar.html 
http://hotfile.com/dl/10063556/348055d/Clutch-SKIDROW.part3.rar.html 
http://hotfile.com/dl/10063558/a7e45e9/Clutch-SKIDROW.part4.rar.html

Code:

Code:

http://netload.in/dateiLSf6Jx0sZu/Clutch-SKIDROW.part1.rar.htm
http://netload.in/dateic5BHcKrsQ9/Clutch-SKIDROW.part2.rar.htm 
http://netload.in/dateiDrhQY6YVfb/Clutch-SKIDROW.part3.rar.htm 
http://netload.in/datei5BCcgQGXcU/Clutch-SKIDROW.part4.rar.htm

Download Dead Disk Doctor 1.26

---

Dead Disk Doctor allows copying files from scratched or damaged CD, DVD disks, unreadable Floppy and Hard Drives or other media. It replaces lost data with random bytes reading files by expandable blocks.
Routine reads file by 4-16kb blocks and when hardware involves errors, the size of block decrease two times and so on until the moment when block of data will be read without any errors, or it reach minimum read size block, depending on file system, then program fills one block with random data and starts to read second one. After successfully reading data, block size increase two times again and again to reach maximum size.

Dead Disk Doctor allows copying files from scratched or damaged CD, DVD disks, unreadable Floppy and Hard Drives or other media. It replaces lost data with random bytes reading files by expandable blocks.

Routine reads file by 4-16kb blocks and when hardware involves errors, the size of block decrease two times and so on until the moment when block of data will be read without any errors, or it reach minimum read size block, depending on file system, then program fills one block with random data and starts to read second one. After successfully reading data, block size increase two times again and again to reach maximum size

Code:

http://rapidshare.com/files/266450111/Dead.Disk.Doctor.Plus.1.26.rar

Download System Mechanic v9.0.0

---

System Mechanic v9.0.0

The package of tools designed to maintain the computer at the highest level. System Mechanic can seek unnecessary and duplicate files, clean registry, find the incorrect labels, delete the references to non-removal programs to track changes made during installation, manage autoloading, to clean up the hard drive of unneeded files, defragment the hold, and much more.

New Product:
PC Health Status Gadget NEW

EnergyBooster ™ NEW

Total Registry Revitalizer ™ NEW

Incinerator ® for Recycle Bin NEW

Tune-up Definitions ™ NEW

What's new in v9?

Changelog:
Tune-up Definitions ™
Diagnose and resolve 1000's of new problems.
EnergyBooster ™
Turn off unused programs for max performance.
Registry Tuner
Detect and fix up to 500% more registry problems.
PLUS ...
hundreds more enhancements that make System Mechanic more effective than ever before!

Installation of the activator:
* Block

Code:

https://svc.iolo.com

Code:

http://192.43.244.18

or alternatively use the supplied patch.

* Use at your own risk, and don't forget to read instructions carefully!!

* Stop all components, including System Mechanic, Firewall, Antivirus, SMSystemAnalyzer, SMTrayNotify, Drive Scrubber & SearchAndRecover, failing to do so will result in improper work.

* To reset your license details, check "Reset license information" and select target component and when you see the welcome screen, press "start 30-day evaluation period".

* Keys generated by keymaker are not official, they will work only side by side with this tool.

* To register offline, check "Subscribe offline" and check "Reset license information", if you want to extend the "30 days" check "Subscribe until" and choose the required period and choose your target component, when you see the license screen press "Enter license information" and enter the proper serials from keymaker into the registration box. (2 serials needed for stand alone license - one for system mechanic, and another for antivirus, and / or 1 pro serial needed for subscription license)

* After completing registration, restart application.You may use "Patch online check" to avoid online check, it's not needed unless you are always connected to web.

Code:

http://hotfile.com/dl/8945586/0c8fd75/SysMe900Sta.rar.html

Download Dr.Web Anti Virus & Anti spam

Dr.Web has three main core functions: the antivirus engine, the mail-scanning engine, and a task scheduler. You are no longer required to drill throughout the program’s configuration menus similarly as in the case of some other programs of this sort as a number of program options are accessible just by right-clicking the tray icons.

The scanning engine, the program’s designers say, is so created as it doesn’t need to rescan the same files regularly. The application allows you to manage differently malware, adware, and hacking tools as they are sorted out in categories. A default action as well as a “what to do if this fails” action can be given to each type of menace.

Key Features:

- Detection and neutralization of malware on hard drives, removable data storage devices and in RAM
- Real-time interception of calls to files on hard and floppy drives, CD/DVD/Blue-ray/Flash drives, and smart cards
- Detection of viruses placed in an archive at any nesting level
- New! The FLY-CODE technology allows checking files compressed by unknown packers
- Protection against unknown threats powered by non-signature detection technology Origins
- Tracing™ and the intelligent heuristic analyzer
- Protection against mass mailings performed by a mail worm from an infected machine
- Protection of account information related to online games, social networks, electronic money systems, credit card numbers and PIN codes
- Detection of spam-bots
- Virus scan of SMTP/POP3/NNTP/IMAP traffic
- On demand/scheduled scan
- Individual scan schedules
- Automatic updating

File Size: 20.53Mb

Download:

Code:

http://hotfile.com/dl/9979661/2829fb7/Dr_Web_AntiVirus_v5.0.4.6300.rar.html

Download Panda Antivirus Pro 2009

A great antivirus solution for Windows, that keeps your computer protected from any threats. The new Panda Antivirus Pro is the easiest-to-use and most intuitive protection for your computer. Just install it and forget about viruses, spyware, rootkits, hackers, online fraud and identity theft.

Hotfile:-

http://hotfile.com/dl/9470257/7637fb8/Pap0009.rar.html

Free Overlord II (2009) CloneDVD-AVENGED

Overlord II (2009) CloneDVD-AVENGED

Code:

http://www.gamespot.com/pc/action/overlordii/index.html

Download

Code:

http://www.novaup.com/download/4a72354be5655
http://www.novaup.com/download/4a7235363e30f
http://www.novaup.com/download/4a723523278a3
http://www.novaup.com/download/4a7234f47822d
http://www.novaup.com/download/4a72350bf175f
http://www.novaup.com/download/4a7234ca37451
http://www.novaup.com/download/4a7234b98b17e
http://www.novaup.com/download/4a7234df6d305
http://www.novaup.com/download/4a723498139f1
http://www.novaup.com/download/4a72348806c54
http://www.novaup.com/download/4a7234614ed0b
http://www.novaup.com/download/4a723446eba37
http://www.novaup.com/download/4a7234752ec6e
http://www.novaup.com/download/4a72342232b1e
http://www.novaup.com/download/4a7234320bc95
http://www.novaup.com/download/4a72340dd882c
http://www.novaup.com/download/4a7233d4d60c2
http://www.novaup.com/download/4a7233e6b8e13
http://www.novaup.com/download/4a7233fa612da
http://www.novaup.com/download/4a7233bed3d42

Free system mechanic tool-kit v6 (mobile)

System Mechanic 6 Mobile Toolkit is perfect for technicians and professionals to perform trouble-shooting and maintenance on any number of PCs directly from the System Mechanic 6 Mobile Toolkit CD. No installation needed - nothing left behind!

Detail Features:-

Perfect for IT professionals
With the Mobile Toolkit CD move from system to system, perform maintenance on each PC, and then simply move on to the next PC. Use Mobile Toolkit over a network by sharing the CD drive on one computer and running it directly from any workstation.

Cost-effective solution
One Mobile Toolkit CD gives you the unlimited license to use the software on any number of computers.

No installation required
The power of System Mechanic can be easily transported and used on any number of computers by simply inserting the CD into each machine and performing the services or maintenance required.

Convenient and proper PC care
Mobile Toolkit takes the hassle out of proper PC maintenance and care, and empowers companies with the ability to globally maintain all of their computers quickly, portably, and safely.

Eliminate the risk of user errors
With Mobile Toolkit, critically important system maintenance can be easily performed by trained technicians without making tools available to standard users that can potentially damage their systems through misuse.

Solve problems and recover from disaster using PC Repair Wizard
Use the new PC Repair Wizard to automatically diagnose and fix hundreds of PC problems with hard drives, system components, installed software, hardware, and more.

Instantly lock down your system with PC Security Optimizer
Automatically find and repair Windows security flaws that leave you open to attack from computer enemies such as spyware, adware, viruses, hackers, and identity thieves.

Keep your system spotless with PC Cleanup Wizard
Let's face it - without regular PC maintenance, computers become increasingly cluttered, disorganized, and sluggish. Automatically remove all forms of PC and Internet junk using the new PC Cleanup Wizard, keeping Windows fresh, fast, and sparkling clean.

Increase PC and Internet performance by up to 300%
Using the new PC Acceleration Wizard, you can automatically optimize system settings and eliminate velocity bottlenecks for
maximum gains in overall performance.

One-click does it all with PC TotalCare�
The only PC maintenance tool you'll need to keep your PC running fast, smooth, and error-free. New PC TotalCare� combines the System Mechanic power into a single one-button interface for the perfect blend of absolute power and effortless simplicity.

Advanced defense against spyware, adware and malware
The System Mechanic Professional Spythom� tool effectively eliminates spyware infection and uses proprietary methods to stop parasites before they start.

Prevent identity theft with System Shield�
System Shield protects your PC from unwanted attempts at uncovering private or confidential data. Shield yourself against identity theft or personal misrepresentation.

Securely wipe all data from any hard drive
Formatting your hard drive does not remove or erase your data. Many programs can recover data from a formatted drive. With DriveScrubber�, you can securely overwrite and remove all data to ensure 100% security.

Instantly recover deleted files, photos, e-mail, and more
Get back deleted pictures, videos, MP3s, e-mail, documents, spreadsheets, system files, and any other file or folder on your hard drive, CD/DVD media, MP3 player, digital camera, memory card, or other portable device using the new powerful Search and Recover StrongScan� technology.


Download Now:-
Code:
http://rapidshare.com/files/17059315...olkit_-6.0.kgb

Free PDF Password Cracker Pro 3.0

QUOTE

PDF Password Cracker Professional edition also allows to search for "owner" and "user" passwords with brute-force and dictionary attacks, effectively optimized for speed (however, don't expect to recover long passwords in a reasonable time with these attacks). In addition, it has Key search attack, which guarantees the decryption (regardless the password length and complexity) of PDF files that use 40-bit encryption (the attack takes about 3-4 days on modern dual-CPU systems).

Key Features
Support PDF 1.7 (Acrobat 8.x) files, including 40-bit RC4 decryption, 128-bit RC4 decryption, AES decryption, compressed files and unencrypted metadata
Recovers user password required to open the file
Brute-Force, or Dictionary attacks are used to recover the password Additional user dictionaries support, case changes, multiple mistypes and other modifications for each dictionary word
Program automatically saves password search state and can resume after a stop or a crash
bullet Patterns can be used to minimize search time if any part of the password is known
Non-English characters in passwords are supported

CODE

http://uploading.com/files/D4SAU70F/Homework_PDF.rar.html

Winsock 2 Repair

Winsock 2 Repair

Repairing Damaged Winsock2

The symptoms when Winsock2 is damaged show when you try to release and renew the IP address using IPCONFIG...

And you get the following error message:

An error occurred while renewing interface 'Internet': An operation was attempted on something that is not a socket.

Also Internet Explorer may give the following error message:
The page cannot be displayed Additionally, you may have no IP address or no Automatic Private IP Addressing (APIPA) address, and you may be receiving IP packets but not sending them.

There are two easy ways to determine if Winsock2 is damaged:

From the XP source files, go to the Support / Tools directory

Winsock Test Method 1
Run netdiag /test:winsock

The end should say Winsock test ..... passed

Winsock Test Method 2

Run Msinfo32
Click on the + by Components
Click on the by Network
Click on Protocol
There should be 10 sections if the Winsock2 key is ok
MSAFD Tcpip [TCP/IP]
MSAFD Tcpip [UDP/IP]
RSVP UDP Service Provider
RSVP TCP Service Provider
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...
MSAFD NetBIOS [\Device\NetBT_Tcpip...

If the names are anything different from those in this list, then likely Winsock2 is corrupted and needs to be repaired.
If you have any 3rd party software installed, the name MSAFD may be changed.
There should be no fewer than 10 sections.

To repair Winsock2

Run Regedit
Delete the following two registry keys:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

Restart the computer
Go to Network Connections
Right click and select Properties
Click on the Install button
Select Protocol
Click on the Add button
Click on the Have Disk button
Browse to the \Windows\inf directory
Click on the Open button
Click on the OK button
Highlight Internet Protocol (TCP/IP)
Click on the OK button
Reboot

Virtual Memory Information

Terminology & Explanation

There are two types of memory, which are as follows:

* System Memory is a memory that is used to store the application data and instruction in order for the system to process and execute that application data and instruction. When you install the memory sticks to increase the system RAM, you are adding more system memory. System Memory can be known as either the physical memory or the main memory.

* Virtual Memory is a memory that uses a portion of HDD space as the memory to store the application data and instruction that the system deemed it doesn't need to process for now. Virtual Memory can be known as the logical memory, and it controls by the Operating System, which is Microsoft Windows. Adding the Virtual Memory can be done in system configuration.


Tutorial Information & Facts or Implementation

Virtual Memory is a HDD space that uses some portion of it as the memory. It is used to store application data and instruction that is currently not needed to be process by the system.

During the program loading process, the system will copy the application data and its instruction from the HDD into the main memory (system memory). Therefore the system can use its resources such as CPU to process and execute it. Once the system memory gets filled up, the system will start moving some of the data and instruction that don't need to process anymore into the Virtual Memory until those data and instruction need to process again. So the system can call the next application data and instruction and copy it into the main memory in order for the system to process the rest and load the program. When the data and instruction that is in the Virtual Memory needs to process again, the system will first check the main memory for its space. If there is space, it will simply swap those into the main memory. If there are not any space left for the main memory, the system will first check the main memory and move any data and instructions that doesn't need to be process into the Virtual Memory. And then swap the data and instruction that need to be process by the system from the Virtual Memory into the main memory.

Having too low of Virtual Memory size or large Virtual Memory size (meaning the size that is above double of the system memory) is not a good idea. If you set the Virtual Memory too low, then the OS will keep issuing an error message that states either Not enough memory or Virtual too low. This is because some portion of the system memory are used to store the OS Kernel, and it requires to be remain in the main memory all the time. Therefore the system needs to have a space to store the not currently needed process data and instruction when the main memory get filled up. If you set the Virtual Memory size too large to support the intensive application, it is also not a good idea. Because it will create the performance lagging, and even it will take the HDD free space. The system needs to transfer the application data and instruction back and forth between the Virtual Memory and the System Memory. Therefore, that is not a good idea. The ideal size for the Virtual Memory is the default size of Virtual Memory, and it should not be exceed the value of the triple size of system memory.

To determine how much virtual memory you need, since the user's system contains the different amount of RAM, it is based on the system. By default, the OS will set the appropriate size for Virtual Memory. The default and appropriate size of Virtual Memory is:

CODE
* 1.5 =
.

For example, if your system contains 256 MB of RAM, you should set 384 MB for Virtual Memory.

CODE
256 MB of RAM (Main Memory) * 1.5 = 384 MB for Virtual Memory


If you would like to determine how much the Virtual Memory is for your system and/or would like to configure and add more virtual memory, follow the procedure that is shown below. The following procedure is based on windows XP Professional.

1-1) Go to right-click My Computer and choose Properties

1-2) In the System Properties dialog box, go to Advanced tab

1-3) Click Settings button that is from the Performance frame

1-4) Once the Performance Options shows up on the screen, go to Advanced tab

1-5) Under the Advanced tab, click the Change button from the Virtual Memory frame to access to the Virtual Memory setting

Then the Virtual Memory dialog box appears on the screen. In there, you are able to check how much the Virtual Memory you set. If you would like to modify the size of Virtual Memory, follow the procedure that is shown below.

2-1) In there, select the drive letter that is used to install the Operating System

2-2) Choose the option that says, "Custom Size:"

Once you choose that option, the setting for Initial Size and Maximum Size become available for you to set. Initial Size (MB) means the actual size of Virtual Memory, and Maximum Size (MB) means the maximum size of Virtual Memory that is allowed to use.

Let's say if your system contains 512 MB of RAM, then the ideal setting for the Virtual Memory is as follows:

CODE

Initial Size (MB): 768
Maximum Size (MB): 1500


Once you are happy with that Virtual Memory size, click the Set button from Paging file size for selected drive to apply the setting for the Virtual Memory size. Then click the OK button to apply the setting.

That's where you can manage and configure for the size of Virtual Memory.


Additional Information

* To maintain the good overall system performance, you should be using the default size of actual size for Virtual Memory and the triple the value of the size of the main memory for the maximum size of Virtual Memory. If you find that main memory plus virtual memory is not big enough to load the intensive application, then you will need to add more main memory onto your system.