How To Stop Spam

How To Stop Spam 

Change Mcft to microsoft

HOW TO STOP SPAM VIA WINDOWS MESSENGER SERVICE
Below you'll find many ways (sorted in the most successful ratio first) to stop the Windows Messenger service, depending on your system environment, some may require more than one process. This service is available only on NT, 2K, XP & Server 2003. Administrator Login is REQUIRED

About The Messenger Service


* Messenger is a Windows Service that runs in the background
* Messenger is not the same as MSN Messenger or any other Instant Messaging Program
* Messenger does not facilitate two-way chatting
* Many Windows Programs, Firewalls, UPS and Antiviruses require the Messenger Service
* Antivirus and UPS software, among others, may not work if Messenger is disabled
* The Messenger Service is usually turned on by default in most Windows NT, 2K and XP systems


1. Manually

1. Example 1

1. Click Start, Run and enter the following command:
RunDll32 advpack.dll,LaunchINFSection %windir%\inf\msmsgs.inf,BLC.Remove
NOTE: This will prevent a long delay when opening Outlook Express if you have the Contacts pane enabled
2. To prevent this, click Start, Run and enter {REGEDIT} Go to:
HKEY_LOCAL_MACHINE\Software\Mcft\Outlook Express
3. Right click in the right pane and select New, Dword value
4. Give it the name Hide Messenger Double click this new entry and set the value to 2
5. End result should look EXACTLY like this:
System Key: [HKEY_LOCAL_MACHINE\SOFTWARE\Mcft\Outlook Express]
Value Name: Hide Messenger
Data Type: REG_DWORD (DWORD Value)
Value Data: (2 = remove messenger)

2. Example 2

1. Copy and paste the following to Run Command Bar in the Start Menu:
RunDll32.exe advpack.dll,LaunchINFSection
%windir%\inf\msmsgs.inf,BLC.Remove

3. Example 3

1. If Example 5 didn't work, then try this - Many users miss or don't know of it
2. Click on Start then go to RUN and type:
C:\WINDOWS\inf\sysoc.inf
3. Change:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,hide,7
4. To:
msmsgs=msgrocm.dll,OcEntry,msmsgs.inf,7
5. Then use Add/Remove Windows Components to remove Messenger
NOTE: You can also prevent access to Windows Messenger using Group Policy or the Set Program Access and Defaults utility added by default in Windows XP SP1 and Windows 2000 SP3

4. Example 4

1. Open Windows Messenger
2. From the menu, select "Tools" then "Options" then "Preferences" tab
3. Uncheck "Run this program when Windows starts"
4. Open Outlook Express
5. From the menu, select "Tools" then "Options" then "General" tab
6. Uncheck the option to "Automatically log on", if it's there
7. Also in Outlook Express, select "View" then "Layout"
8. Uncheck the option to "display Contacts" - The program will open a connection and display a list of all Contacts on line if you do not
9. In "Startup Folder" make sure there is no entry there for Messenger
10. Open Norton Anti-Virus if you have it installed
11. Click "Options" then "Instant Messenger"
12. Unckeck "Windows Messenger (recommended"
NOTE: This list ought to work in disassociate MSN from Outlook Express, so that it'll only start up if you really want it to

5. Example 5

1. 2000

* Click Start-> Settings-> Control Panel-> Administrative Tools->Services
* Scroll down and highlight "Messenger"
* Right-click the highlighted line and choose Properties
* Click the STOP button
* Select Disable in the Startup Type scroll bar
* Click OK

2. XP Home

* Click Start->Settings ->Control Panel
* Click Performance and Maintenance
* Click Administrative Tools
* Double click Services
* Scroll down and highlight "Messenger"
* Right-click the highlighted line and choose Properties
* Click the STOP button
* Select Disable in the Startup Type scroll bar
* Click OK

3. XP Professional

* Click Start->Settings ->Control Panel
* Click Administrative Tools
* Click Services
* Double click Services
* Scroll down and highlight "Messenger"
* Right-click the highlighted line and choose Properties.
* Click the STOP button.
* Select Disable in the Startup Type scroll bar
* Click OK

4. Windows NT

* Click Start ->Control Panel
* Double Click Administrative Tools
* Select Services-> Double-click on Messenger
* In the Messenger Properties window, select Stop
* Then choose Disable as the Startup Type
* Click OK
NOTE: If you stop the service and don’t adjust the startup type, the Messenger service will start automatically the next time you reboot. Keep in mind that when you disable the Messenger service, you'll no longer receive messages about an attached UPS, and you won’t be notified of print job completion, performance alerts, or antivirus activity (from Windows) not the program you're using for those purposes.

6. Example 6

1. To disable receipt of messenger pop-ups, verify that your firewall disables inbound traffic on UDP ports 135, 137, and 138, and TCP ports 135 and 139. On a system connected directly to the Internet, you should also disable inbound traffic on TCP port 445. If the system you want to protect is part of a Win2K-based network with Active Directory (AD), don't block incoming traffic on port 445 - Mcft Knowledge Base Article - 330904
Code:
http://support.Mcft.com/default.aspx?scid=kb;en-us;330904

NOTE: You can use the firewall approach only if your system doesn't communicate with legacy systems that rely on NetBIOS name resolution to locate machines and shared resources. If, for example, you let users running Windows 9x share your printer or scanner, when you disable inbound NetBIOS traffic, users won't be able to connect to these shared resources. Regardless of the method you choose, you can stop messenger spam

2. Program

1. Example 1

NOTE: On Oct 15, 2003, Mcft releases Critical Security Bulletin MS03-043 warning users that the Windows Messenger Service running and exposed by default in all versions of Windows NT, 2000 and XP, contains a "Remote Code Execution" vulnerability that allows any not otherwise secured and protected Windows machine to be taken over and remotely compromised over the Internet
1. Shoot the Messenger
Code:
http://grc.com/files/shootthemessenger.exe


2. Example 2

1. Messenger Disable
Code:
http://www.dougknox.com/xp/utils/MessengerDisable.zip

NOTE: If you choose to uninstall Windows Messenger on a system with SP1 installed, you will receive an error message about "un-registering" an OCX file. This is normal, and doest not affect the removal process. Windows Messenger will still be removed

3. TEST

1. Example 1

1. Right-click "My Computer"
2. Select "Manage"
3. Under "System Tools" right-click on "Shared Folders"
4. Choose "All Tasks" and select "Send Console Message..."
5. If you recieve the following error message then the service has been disabled, otherwise confirm that you have disabled it or try another example
"The following error occured while reading the list of sessions from Windows clients:
Error 2114: The Server service is not started."

2. Example 2

1. Click Start then "Run"
2. Type in {cmd.exe}
3. Type in net send 127.0.0.1 hi
4. If you get a popup "hi" message, then confirm that you have disabled it or try another example

4. IF YOU INSIST

1. If you insist on keeping Windows Messenger, then I'd recommend Messenger Manager - "Allows you to keep your messenger service running, as is intended and needed by Windows. This ensures that vital system errors and notifications may be sent informing you of Important System Events"
Code:
http://www.sellertools.com/default.asp?i=MessageManager3.htm

2. However, as a replacement to Windows Messenger remote control feature, I'd recommend this free tool Virtual Network Computing - "It is a remote control software which allows you to view and interact with one computer (the "server") using a simple program (the "viewer") on another computer anywhere on the Internet. The two computers don't even have to be the same type, so for example you can use VNC to view an office Linux machine on your Windows PC at home"
Code:
http://www.realvnc.com/download.html



RESULTS WILL VARY
No matter how good your systems may be, they're only as effective as what you put into them.

Trick to Find Serials / Keys

ok, this is a little trick that i usually use to find cd keys with google.


if your looking for a serial number for nero (for example) goto google.com and type nero 94FBR and it'll bring it up

this works great in google

HOW DOES THIS WORK?

Quite simple really. 94FBR is part of a Office 2000 Pro cd key that is widely distributed as it bypasses the activation requirements of Office 2K Pro. By searching for the product name and 94fbr, you guarantee two things.

1)The pages that are returned are pages dealing specifically with the product you're wanting serial for.

2)Because 94FBR is part of a serial number, and only part of a serial number, you guarantee that any page being returned is a serial number list page.


I hope this trick help you finding your cd keys easily

Enjoy :)

How to modify *.exe files

learn how to change *.exe files, in 5 easy steps:

1) Don't try to modify a prog by editing his source in a dissasembler.Why?
Cause that's for programmers and assembly experts only.

try to view it in hex you'll only get tons of crap you don't understand.
First off, you need Resource Hacker(last version). It's a resource editor-
very easy to use, You can download it at h**p://www.users.on.net/johnson/resourcehacker/

2) Unzip the archive, and run ResHacker.exe. You can check out the help file too


3) You will see that the interface is simple and clean. Go to the menu FileOpen or press Ctrl+O to open a file. Browse your way to the file you would like to edit. You can edit *.exe, *.dll, *.ocx, *.scr and *.cpl files, but this tutorial is to teach you how to edit *.exe files, so open one.

4) In the left side of the screen a list of sections will appear.
The most common sections are
-String table;
-RCData;
-Dialog;
-Cursor group;
-Bitmap;
-WAV.
*Icon: You can wiew and change the icon(s) of the program by double-clicking the icon section,chossing the icon, right-clicking on it an pressing "replace resource". After that you can choose the icon you want to replace the original with.
*String table: a bunch of crap, useful sometimes, basic programming knowladge needed.
*RCData: Here the real hacking begins. Modify window titles, buttons, text, and lots more!
*Dialog:Here you can modify the messages or dialogs that appear in a program. Don't forget to press "Compile" when you're done!
*Cursor group: Change the mouse cursors used in the program just like you would change the icon.
*Bitmap: View or change images in the programs easy!
*WAV:Change the sounds in the prog. with your own.


5) In the RCData,Dialog,Menu and String table sections you can do a lot of changes. You can modify or translate the text change links, change buttons, etc.


TIP: To change a window title, search for something like: CAPTION "edit this".
TIP: After all operations press the "Compile Script" button, and when you're done editing save, your work @ FileSave(Save as).
TIP: When you save a file,the original file will be backed up by default and renamed to Name_original and the saved file will have the normal name of the changed prog.
TIP: Sometimes you may get a message like: "This program has a non-standard resource layout... it has probably been compressed with an .EXE compressor." That means that Resource Hacker can't modify it because of it's structure.

HOW TO CAPTURE STREAMING MEDIA

many websites (http://ww.smashits.com) stream songs and videos
people believe they cannot be downloaded, quite why i dont know. they kinda think there is no file present to download
Once the file is located it can then be retrieved by nettransport
nettransport is able to dwnld any file whether ftp or rtsp etc

1. Download Project URL Snooper 1.02.01 from http://rain66.at.infoseek.co.jp/
2. Install URL Snooper (and WinPcap together)
3. Don't run URL Snooper when it is done installing
4. Restart computer
5. Open Project URL Snooper
6. Click on the General Options Tab
7. user posted image
8. Chose a network adapter
9. Now click on the search tab
10. Click Sniff Network
11. Go to a webpage and you should see some results in the results list
12. If nothing is appearing then chose another network adapter, until one works

13. Now you are ready to begin searching
14. Click the "Hide Non-Streaming URLs" option to hide all http:// references and only show URLs corresponding to streaming audio/video (rtsp, pnm, wma, etc.)
15. Then click Sniff Network
16. Your links should appear as you begin streaming your file
17. Select your desired stream user posted image
18. usually rm file user posted image
19. On the bottom there should be the link which you simply copy user posted image

20. Download nettransport from here ftp://down_transport:123@s1.5fox.com/NT2Setup_multi.EXE or
ftp://nettransport:nettransport@61.153.24...Setup_multi.EXE
http://lycos26486.l97.lycos.com.cn/download.htm

21. Install it
22. Click on new
23. Paste link

Now you should be able to download any file